BIS-V Vinylester, 420 ml

€34.20

BIS-V is a ETA option 1 assessed, rapid cure, styrene free, non-sag, Vinylester bInjection Adhesive for HIGH LOADS. BIS-V is suitable for both Threaded Rod and Rebar in cracked and non-cracked concrete

ETA Assessed for Threaded Rods M8 - M30 and Rebar Dowels Ø8 - 32 mm
ETA Approved for Post Installed Rebar Ø8 - 25 mm
Impact tested for the installation of Safety Barrier Glazing and Glass Railings acc. to DIN 18008-4, Cat. A. new
For Cracked & Uncracked Concrete
For Dry, Wet & Flooded Holes
Fire Rated F120
Seismic Approval C1
VOC Rating A+
Leed Tested
Drinking Water Certificate
Styrene Free
B+BTEC DesignFix® Support

Skip to the end of the images gallery

Skip to the beginning of the images gallery

Details

Installation Procedures

Installation Dimensions

For Installation Dimensions and Loads please refer to the Technical Data Sheets (TDS) or European Technical Assessment (ETA) under Downloads.

Curing Times

*Cartridge Temperature should be min. +15˚C. For damp bore holes the curing time should be doubled.

Concrete temperature ˚C	Processing Time	Dry bore holes
≥ -10*	90 min	24 h
≥ -5	90 min	14 h
≥ 0	45 min	7 h
≥ +5	25 min	2 h
≥ +10	15 min	80 min
≥ +20	6 min	45 min
≥ +30	4 min	25 min
≥ +35	2 min	20 min
≥ +40	1,5 min	15 min